# Test Data # 0403-1 New Boat Propellers

• Transport Package: Fyher
• Trademark: ejerj
• Model NO.: new laptop
• Production Capacity: 346346

Product Description

999

Packaging & Shipping

Wire Pay off system:Pay off system is usually according to the type in the picture, pneumatic lifting pulley, convenient wire threading.we can also produce hydraulic wire pay off systems.
Derusting machine:The derusting machine uses high-speed operation to twist the wire rod at different angles to remove the rust on the surface.

OTO Module:The first wire drawing module adopts an OTO wire storage structure. When a roll of wire rod is about to be used up, the first roll of wire rod can be welded with the second roll of wire rod without stopping the machine.
Drawing drum:The drum of drawing machine adopts narrow slot water cooling, which has good cooling effect. And it is not easy to enter the dust.The drum is sprayed with tungsten carbide coating to prolong the service life.

Friends Friends from all over the world. all over the world.

Friends Friends from all over the world. all over the world.
All key spare parts of the company are independently produced by us to control their processing accuracy and quality, thereby extending the service life of the machinery.The company has taken the lead in passing the ISO9001:2008 quality system certification and the EU CE product safety certification in the same industry, providing reliable assurance for excellent product quality.

The company's machinery and equipment sell well in China, and are exported more than 100 countries and regions such as Romania, Lithuania, Turkey, Poland, Belarus, Ukraine, Russia, Kazakhstan, Saudi Arabia, Egypt, Algeria, South Africa,Vietnam, Thailand, India, Pakistan, Philippines, Indonesia, Australia, Mexico, Colombia, Argentina, Bolivia, Brazil, etc.

After more than ten years of development, the company has grown into one of the leading enterprises in the industry. We adhere to the tenet of "customer first, technology leading". In the future, the company will comprehensively promote industrial development and upgrading, and build the world's leading steel processing equipment.

Items	Unit	LZ-800-10	LZ-700-9	LZ-560-10	LZ-400-10
Reel diameter		800	700	560	400
Drawing dies	time	10	9	10	10
Max inlet diameter	mm	Φ10-8	Φ8-6.5	Φ6.5-5.5	Φ3.5-2.0
Min outlet diameter	mm	Φ4-3	Φ3-2.5	Φ2-1.8	Φ1-0.8
Drawing speed	m/min	360	480	720	840
Inlet tensile strength	Mpa	≤1300	≤1300	≤1300	≤1300
Total compressibility	%	84-85.94	85.94-85.21	90.53-89.29	87.24-84
Average compressibility	%	18.42-19.58	19.58-19.13	21.00-20.02	18.61-16.74
Single motor power	Kw	90-55	75-55	37-22	15-7.5

9

zidiyi navigation

Production process :

Please enter the title hereFrame:

Production process :
Low carbon steel wire rod→High pay-off frame→Mechanical derusting→straight line wire drawing machine→Tension device →wire take-up machine.

Frame:
It is the foundation of the whole drawing machine units. It is welded by buttress plate, bent steel, section steel. All materials are designed safety enough to enhance the rigidity.

Drive:
Power by the AC frequency motor through high-frequency joint narrow V-belts, spread by the hardened reducer to capstan.

Capstan structure:
Material is ZG45 steel casting blank body, after quenching and tempering treatment, HB250. hardening layer height 100mm, depth more than 0.4 mm, HRC78-82,long service life.fdgdfhdfhdfhds  sd

Capstan structure:
Material is ZG45 steel casting blank body, after quenching and tempering treatment, HB250. hardening layer height 100mm, depth more than 0.4 mm, HRC78-82,long service life.

Capstan cooling:
The main shaft of capstan is fixedly install an upper spiral water jacket, below is a water wheel. Capstan is mounted on the spindle, the lower part of water jacket and capstan inner wall form 10-15 mm water storage. Inside of the capstan use narrow slit water cooling,forming good circulation water cooling.

Drawing die box:
Die box is welded structure, into two cavity. The guide roller is mounted into the side to ensure that steel wire can straight into the drawing die, die holder should be adjusted to wire tangent to enter the drawing rolls tuning roller installed at the entry end of the mold base tuning roll by a small cylinder put power, tuning the swing of the roller, so that the corresponding sensor output signal to fine-tune the speed of change. 

Capstan structure:
Material is ZG45 steel casting blank body, after quenching and tempering treatment, HB250. hardening layer height 100mm, depth more than 0.4 mm, HRC78-82,long service life.

Capstan cooling:
The main shaft of capstan is fixedly install an upper spiral water jacket, below is a water wheel. Capstan is mounted on the spindle, the lower part of water jacket and capstan inner wall form 10-15 mm water storage. Inside of the capstan use narrow slit water cooling,forming good circulation water cooling.

Drawing die box:
Die box is welded structure, into two cavity. The guide roller is mounted into the side to ensure that steel wire can straight into the drawing die, die holder should be adjusted to wire tangent to enter the drawing rolls tuning roller installed at the entry end of the mold base tuning roll by a small cylinder put power, tuning the swing of the roller, so that the corresponding sensor Ω√output signal to fine-tune the speed of change. 

Please enter the title here

This street light features high brightness, energy saving, environmental protection, and easy installation. It has a waterproof rating of IP67 and has passed CE certification. It is suitable for schools, parks, roadsides, factories, squares, etc. It has a warranty period of 3 years. Moreover, we can provide various styles to meet your needs.